Skip to main content
Skip table of contents

CLI cookbook: how to change IP address of Delphix Engine

This topic describes how to change an IP address on the Delphix Engine.

Procedure

  1. Stop all running VDBs by clicking the Stop button on the VDB card.

  2. Disable all dSources.

  3. Log into the Delphix Engine as sysadmin user and switch to the network interface context. Then use the list command to view the available network interfaces, and select the public interface to be changed.

    CODE
    delphix> network
    delphix network> setup
    delphix network interface> list
    NAME     
    vmxnet3s0
    delphix network interface> select vmxnet3s0 
    delphix network interface 'vmxnet3s0'> get
        type: NetworkInterface
        name: vmxnet3s0
        addresses:
            0:
                type: InterfaceAddress
                address: 10.1.2.3/24
                addressType: STATIC
                enableSSH: true
                state: OK
        dataNode: DATA_NODE-34
        device: vmxnet3s0
        macAddress: 0:c:29:32:96:a3
        mtu: 1500
        mtuRange: 60-9000
        reference: NETWORK_INTERFACE-vmxnet3s0-DATA_NODE-34
        state: OK
  4. Run the update command and update the address to the new IP address.

    CODE
    delphix network interface 'vmxnet3s0'> update
    delphix network interface 'vmxnet3s0' update *> edit addresses.0
    delphix network interface 'vmxnet3s0' update addresses.0 *> get
    Properties
        type: InterfaceAddress
        address: 172.16.151.154/24
        addressType: STATIC
        enableSSH: true
        
    delphix network interface 'vmxnet3s0' update addresses.0 *> set address=10.1.2.4/24
    delphix network interface 'vmxnet3s0' update addresses.0 *> get
        type: InterfaceAddress (*)
        address: 10.1.2.4/24 (*)
        addressType: STATIC (*)
        enableSSH: true (*)
  5. Commit the operation.

    CODE
    delphix network interface 'vmxnet3s0' update addresses.0 *> commit
    delphix network interface 'vmxnet3s0'> get
        type: NetworkInterface
        name: vmxnet3s0
        addresses:
            0:
                type: InterfaceAddress
                address: 10.1.2.4/24
                addressType: STATIC
                enableSSH: true
                state: OK
        dataNode: DATA_NODE-34
        device: vmxnet3s0
        macAddress: 0:c:29:32:96:a3
        mtu: 1500
        mtuRange: 60-9000
        reference: NETWORK_INTERFACE-vmxnet3s0-DATA_NODE-34
        state: OK
  6. Re-enable the VDBs and dSources running from the engine.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.