CLI cookbook: how to change IP address of Delphix Engine

This topic describes how to change an IP address on the Delphix Engine.

Procedure

1. Stop all running VDBs by clicking the Stop button on the VDB card.

2. Disable all dSources.

3. Log into the Delphix Engine as sysadmin user and switch to the network interface context. Then use the list command to view the available network interfaces, and select the public interface to be changed.

   CODE

   delphix> network
   delphix network> setup
   delphix network interface> list
   NAME     
   vmxnet3s0
   delphix network interface> select vmxnet3s0 
   delphix network interface 'vmxnet3s0'> get
       type: NetworkInterface
       name: vmxnet3s0
       addresses:
           0:
               type: InterfaceAddress
               address: 10.1.2.3/24
               addressType: STATIC
               enableSSH: true
               state: OK
       dataNode: DATA_NODE-34
       device: vmxnet3s0
       macAddress: 0:c:29:32:96:a3
       mtu: 1500
       mtuRange: 60-9000
       reference: NETWORK_INTERFACE-vmxnet3s0-DATA_NODE-34
       state: OK

4. Run the update command and update the address to the new IP address.

   CODE

   delphix network interface 'vmxnet3s0'> update
   delphix network interface 'vmxnet3s0' update *> edit addresses.0
   delphix network interface 'vmxnet3s0' update addresses.0 *> get
   Properties
       type: InterfaceAddress
       address: 172.16.151.154/24
       addressType: STATIC
       enableSSH: true
       
   delphix network interface 'vmxnet3s0' update addresses.0 *> set address=10.1.2.4/24
   delphix network interface 'vmxnet3s0' update addresses.0 *> get
       type: InterfaceAddress (*)
       address: 10.1.2.4/24 (*)
       addressType: STATIC (*)
       enableSSH: true (*)

5. Commit the operation.

   CODE

   delphix network interface 'vmxnet3s0' update addresses.0 *> commit
   delphix network interface 'vmxnet3s0'> get
       type: NetworkInterface
       name: vmxnet3s0
       addresses:
           0:
               type: InterfaceAddress
               address: 10.1.2.4/24
               addressType: STATIC
               enableSSH: true
               state: OK
       dataNode: DATA_NODE-34
       device: vmxnet3s0
       macAddress: 0:c:29:32:96:a3
       mtu: 1500
       mtuRange: 60-9000
       reference: NETWORK_INTERFACE-vmxnet3s0-DATA_NODE-34
       state: OK

6. Re-enable the VDBs and dSources running from the engine.