Deployment for OCI

Compute shapes

The minimum requirements are listed below:

• 8vCPUs minimum

• 64GB RAM minimum

• Network Bandwidth: 10 Gbps min (25 Gbps recommended) 

• Processors: Intel or AMD (No ARM)

• Storage

  • SSD or NVMe (No HDD)

Recommended compute shapes:

• VM.Standard2

• VM.Standard3.Flex

• VM.Standard.E[3,4,5].Flex

• The Delphix Engine most closely resembles a storage appliance and performs best when provisioned using a storage-optimized shape.

• Larger shapes provide more CPU, which can prevent resource shortfalls under high I/O throughput conditions.

• Larger shapes also provide more memory, which the Delphix Engine uses to cache database blocks. More memory will provide better read performance.

• For more information on OCI shapes, refer to OCI shapes.

Virtual cloud network (VCN)

• The Delphix Engine and all of the source and target environments must be deployed in a VCN to ensure that private IP addresses are static and do not change when restarting instances.

• By default, OCI subnets are considered public. When defining a subnet, it is recommended to set it as private. Unless required by the environment, the VCN should not include a Public Subnet.

• When adding environments to the Delphix Engine, use the host's VCN (static private) IP addresses.

Static private IP

• The Delphix instance should be launched with a static private IP address. For security reasons, it is encouraged to avoid configuring the engine with a Public IP address; however, it could be passable to use a dynamic Public IP address in addition to a static Private IP address if the environment requires such access. 

Security rules configuration

• OCI allows two firewall features: Network Security Groups (NSGs) and Security Lists. Oracle recommends the use of NSGs over Security Lists because NSGs let the VCN subnet architecture be separate from the application security requirements. More information can be found in this Oracle documentation

• A VCN will use a Security List to define default rules. By default, the security list will only open port 22 for SSH access. The Security List must be modified, or new NSGs created, to allow access to all of the networking ports used by the Delphix Engine and the various source and target engines.

• This dual implementation of firewall or security rules may be different from other clouds, please see OCI documentation for best practices.

• See Network performance configuration options for information about network performance tuning.

• See General network and connectivity requirements for information about specific port configurations.

General storage configuration

• Allocate initial storage equal to the size of the physical source database storage. For high redo rates and/or high DB change rates, allocate an additional 10-20 %.

• Add storage when storage capacity approaches 30% free.

• Delphix recommends using a minimum of four equally sized storage disks to run the Delphix Engine. This allows the Delphix File System (DxFS) to assure its file systems are always consistent on disk without additional serialization. This also enables the Delphix Engine to achieve higher I/O rates by queueing more I/O operations to its storage.

• Must use Block Volume for data storage.

• Block Volumes must be attached using Paravirtualized mode.

OCI storage configuration

• Currently supported Shapes only support Block Volumes; File Storage is not supported.

• Paravirtualized block devices are required; currently, iSCSI devices are not supported.

• Elastic Performance Configuration Options (aka Volume Performance Policy): use Higher Performance.

• For Delphix Continuous Cloud Engines backed by object storage, read the section Delphix Elastic Data Engines (Engines backed by object storage) in Initial Setup.

  • Block storage for caching requires a minimum of 200G Higher Performance volumes for caching.