Known issues
Version 27.0.0.0
Key | Summary | Workaround |
---|---|---|
DLPX-90568 | A sysadmin user cannot view actions initiated by a different sysadmin user. | None |
DLPX-92005 | The option to repave back to the source engine is not supported on Elastic Data Engines. | None |
DLPX-88930 | An “Apply Now” upgrade from 18.0.0.x to 19.0.0.x+ will log the user out due to the | None |
Version 26.0.0.0
Key | Summary | Workaround |
---|---|---|
DLPX-90568 | A sysadmin user cannot view actions initiated by a different sysadmin user. | None |
DLPX-88930 | An “Apply Now” upgrade from 18.0.0.x to 19.0.0.x+ will log the user out due to the | None |
Version 25.0.0.0
Key | Summary | Workaround |
---|---|---|
DLPX-58185 | Changing a custom policy while it is running on an object can cause the policy execution to fail. | None |
DLPX-88930 | An “Apply Now” upgrade from 18.0.0.x to 19.0.0.x+ will log the user out due to the | None |
DLPX-90568 | A sysadmin user cannot view actions initiated by a different sysadmin user. | None |
DLPX-91737 | Provisioning an Oracle vPDB fails with | None |
Version 24.0.0.0
Key | Summary | Workaround |
---|---|---|
DLPX-58185 | Changing a custom policy while it is running on an object can cause the policy execution to fail. | None |
DLPX-88930 | An “Apply Now” upgrade from 18.0.0.x to 19.0.0.x+ will log the user out due to the | None |
DLPX-90491 | SnapSync of a standby Oracle PDB might fail with | Remove the dSource for the initial load and ensure the PDB SnapSync completes without interruption. For a full backup after the initial, a new full backup with the “Do Not Resume” option will need to be taken, which should complete without interruption. |
DLPX-90568 | A sysadmin user cannot view actions initiated by a different sysadmin user. | None |
DLPX-90596 | Enabling an operation on an Oracle vPDB fails after the vPDB is exported to ASM using an in-place V2ASM operation, followed by a migrate operation. | Provision a new vPDB from the original vPDBs latest point in time and then delete the original vPDB. |
DLPX-91299 | Having a custom definition of | Remove the following variables from the
|
DLPX-91506 | Network setup will fail on a fresh engine install on VMware if the environment does not contain a DHCP server. Modifications to DNS or MTU will fail on fresh installs regardless of the platform the engine is running on. | None |
DLPX-91737 | Provisioning an Oracle vPDB fails with | None |
Version 23.0.0.0
Key | Summary | Workaround |
---|---|---|
DLPX-58185 | Changing a custom policy while it is running on an object can cause the policy execution to fail. | None |
DLPX-88930 | An “Apply Now” upgrade from 18.0.0.x to 19.0.0.x+ will log the user out due to the | None |
DLPX-89128 |
| None |
DLPX-90491 | SnapSync of a standby Oracle PDB might fail with | Remove the dSource for initial load and ensure the PDB SnapSync completes without interruption. For a full backup after the initial, a new full backup with the “Do Not Resume” option will need to be taken, which should complete without interruption. |
DLPX-90568 | A sysadmin user cannot view actions initiated by a different sysadmin user. | None |
DLPX-90596 | Enabling an operation on an Oracle vPDB fails after the vPDB is exported to ASM using an in-place V2ASM operation, followed by a migrate operation. | Provision a new vPDB from the original vPDB's latest point in time and then delete the original vPDB. |
DLPX-91299 | Having custom definition of PATH or ORACLE_HOME in .bashrc or.bash_profile in a linux host may lead to failure of VDB refresh and other VDB Operations. | Remove the following variables from the .bashrc and .bash_profile files for the user profile used by Delphix engine to connect to the host:
or Consider using a different or dedicated user for Delphix operations to keep the .bashrc and .bash_profile files clean. or Move or clean these files. |
Version 22.0.0.0
Key | Summary | Workaround |
---|---|---|
DLPX-58185 | Changing a custom policy while it is running on an object can cause the policy execution to fail. | None |
DLPX-88930 | An “Apply Now” upgrade from 18.0.0.x to 19.0.0.x+ will log the user out due to the | None |
DLPX-89128 |
| None |
DLPX-90491 | SnapSync of a standby Oracle PDB might fail with | Remove the dSource for initial load and ensure the PDB SnapSync completes without interruption. For a full backup after initial, a new full backup with “Do Not Resume” option will need to be taken, and this should complete without interruption. |
DLPX-90568 | A sysadmin user cannot view actions initiated by a different sysadmin user. | None |
DLPX-90596 | Enable operation on an Oracle vPDB fails after the vPDB is exported to ASM using an in-place V2ASM operation followed by a migrate operation. | Provision a new vPDB from the original vPDB's latest point in time and then delete the original vPDB. |
DLPX-90748 | Failed to proxy-enable a vPDB when its vCDB's name has same prefix as another vCDB. | Enable the vCDB first and then it's corresponding vPDB. |
DLPX-90785 | SnapSync operation for Oracle Staging Push dSources will fail with | No workaround. |
DLPX-90805 | ZFS filesystems are created with 128k block size for Oracle Staging Push dSources resulting in high CPU usage and NFS latency. | No workaround. |
DLPX-91299 | Having custom definition of PATH or ORACLE_HOME in .bashrc or.bash_profile in a linux host may lead to failure of VDB refresh and other VDB Operations. | Remove the following variables from the .bashrc and .bash_profile files for the user profile used by Delphix engine to connect to the host:
or Consider using a different or dedicated user for Delphix operations to keep the .bashrc and .bash_profile files clean. or Move or clean these files. |
Version 21.0.0.0
Key | Summary | Workaround |
---|---|---|
DLPX-58185 | Changing a custom policy while it is running on an object can cause the policy execution to fail. | None |
DLPX-78589 | During an upgrade, when the Continuous Data Engine tries to run the ASE | When the ASE |
DLPX-86181 | Provision, refresh, rewind, or start operations on a virtual database, on a Solaris host with NFSv4 enabled, may become stuck indefinitely due to the mount process getting stuck on the Solaris NFS client. | Switch the NFS protocol to v3 using the Delphix Continuous Data Engine CLI, manually terminate the stuck mount processes on the Solaris host, then re-attempt the failed operation. |
DLPX-88930 | An “Apply Now” upgrade from 18.0.0.x to 19.0.0.x+ will log the user out due to the delphix-mgmt service restarting. The upgrade may still be in progress (e.g. quiesce jobs). To view the upgrade progress, login into Setup as a sysadmin to view the running actions. | None |
DLPX-89128 |
| None |
DLPX-89562 | Self-Service Refresh can still get an | The default
CODE
|
DLPX-89696 | The start of an Oracle RAC virtual PDB in a virtual CDB, fails with an | Start the vCDB instances manually (one at a time) from the CLI on all the nodes where the vPDB instance is not running as follows:
CODE
CODE
|
DLPX-90596 | Enable operation on a vPDB fails after the vPDB is exported to ASM using an in-place V2ASM operation followed by a migrate operation. | Provision a new vPDB from the original vPDB's latest point in time and then delete the original vPDB. |
Version 20.0.0.0
Key | Summary | Workaround |
---|---|---|
DLPX-58185 | Changing a custom policy while it is running on an object can cause the policy execution to fail. | None |
DLPX-78589 | During an upgrade, when the Continuous Data Engine tries to run the ASE | When the ASE |
DLPX-84598 | A sysadmin user cannot view actions initiated by a different sysadmin user. | None |
DLPX-86181 | Provision, refresh, rewind, or start operations on a virtual database, on a Solaris host with NFSv4 enabled, may become stuck indefinitely due to the mount process getting stuck on the Solaris NFS client. | Switch the NFS protocol to v3 using the Delphix Continuous Data Engine CLI, manually terminate the stuck mount processes on the Solaris host, then re-attempt the failed operation. |
DLPX-87213 | When relocating multiple terabytes of data either via block to object storage migration or device removal, management of the engine can become unresponsive for a lengthy period of time (e.g. 30+ mins), dependent on the dataset size and workload. | None, the data relocation and concurrent IO workloads will continue in the background. If the engine cannot be accessed after one hour, contact Delphix Support for corrective actions. |
DLPX-88930 | An Apply Now upgrade from 18.0.0.x to 19.0+ will log the user out due to the delphix-mgmt service restarting. The upgrade may still be in progress (e.g. quiesce jobs). To view the upgrade progress, login into Setup as a sysadmin to view the running actions. | None |
DLPX-89128 |
| None |
DLPX-89562 | Self-service refresh can still get an IllegalStateException while running the reprovision, because of retries for reprovision. | The default
CODE
|
DLPX-89696 | Start of an Oracle RAC virtual PDB, in a virtual CDB, fails with an error | Start the vCDB instances manually (one at a time) from CLI on all the nodes where vPDB instance is not running as follows:
CODE
CODE
|
Version 19.0.0.0
Key | Summary | Workaround |
---|---|---|
DLPX-58185 | Changing a Custom Policy while it is running on an object can cause the Policy execution to fail. | None |
DLPX-78589 | During an upgrade, when the engine tries to run the ASE | When the ASE UNMOUNT command is hung, the ASE instance must be restarted. |
DLPX-84598 | A sysadmin user cannot view actions initiated by a different sysadmin user. | None |
DLPX-84710 | Improved handling of missing networking devices after instance type migration. | None |
DLPX-86181 | Provision, refresh, rewind, or start operations on a virtual database on a Solaris host with NFSv4 enabled may become stuck indefinitely due to mount process getting stuck on the Solaris NFS client. | Switch the NFS protocol to v3 using the Delphix Continuous Data Engine CLI, manually terminate the stuck mount processes on the Solaris host, then re-attempt the failed operation. |
DLPX-87213 | When relocating multiple terabytes of data either via block-to-object storage migration or device removal, management of the engine can become unresponsive for a lengthy period of time (i.e. 30+ mins), dependent on the dataset size and workload. | None, the data relocation and concurrent IO workloads will continue in the background. If the engine cannot be accessed after one hour, contact Delphix Support for corrective actions. |
DLPX-88930 | An ‘Apply Now’ upgrade from 18.0.0.x to 19.0.0.x will logout the user due to the delphix-mgmt service restarting. The upgrade may still be in progress (e.g. quiesce jobs). To view the upgrade progress, login into Setup as sysadmin to view the Running Actions. | None |
DLPX-89128 |
| None |
DLPX-89817 | Software keystore TDE-enabled provisioning fails after upgrading to 19.0.0.0 | Refresh the source environment after the Delphix engine upgrade and re-attempt the provision. |
Version 18.0.0.0
Key | Summary | Workaround |
---|---|---|
DLPX-58185 | Changing a Custom Policy while it is running on an object can cause the Policy execution to fail. | None |
DLPX-78589 | During an upgrade, when the engine tries to run the ASE | When the ASE |
DLPX-82158 | When discovering an Oracle RAC cluster, the engine automatically assigns instance numbers starting with 1, resulting in SnapSync failures. | Manually update the RAC instance number through the Delphix CLI after an environment refresh. |
DLPX-84598 | A sysadmin user cannot view actions initiated by a different sysadmin user. | None |
DLPX-84710 | Improved handling of missing networking devices after instance type migration. | None |
DLPX-86181 | Provision, refresh, rewind, or start operations on a virtual database on a Solaris host with NFSv4 enabled may become stuck indefinitely due to mount process getting stuck on the Solaris NFS client. | Switch the NFS protocol to v3 using the Delphix Continuous Data Engine CLI, manually terminate the stuck mount processes on the Solaris host, then re-attempt the failed operation. |
DLPX-87213 | When relocating multiple terabytes of data either via block-to-object storage migration or device removal, management of the engine can become unresponsive for a lengthy period of time (i.e. 30+ mins), dependent on the dataset size and workload. | None, the data relocation and concurrent IO workloads will continue in the background. If the engine cannot be accessed after one hour, contact Delphix Support for corrective actions. |
DLPX-88322 | If a datafile is added when a SnapSync job is running, provision or refresh to the snapshot generated by the SnapSync job will fail. | Take a new source snapshot (incremental is fine) and refresh the vPDB from the new snapshot. |
Version 17.0.0.0
Key | Summary | Workaround |
---|---|---|
DLPX-56944 | In Solaris 5.11 environments where the Delphix OS user shell is set to | Contact Delphix Support for corrective actions. |
DLPX-58185 | Changing a custom policy while it is running on an object can cause the policy execution to fail. | None |
DLPX-66155 | Restarting a Delphix Continuous Data Engine during a network throughput test is not recommended, as it may lead to a system hang. | None |
DLPX-78589 | During an upgrade, when the Continuous Compliance Engine attempts to run the ASE | When the ASE |
DLPX-82158 | When discovering an Oracle RAC cluster, Delphix automatically assigns instance numbers starting with 1, resulting in SnapSync failures | Manually update the RAC instance number through the Delphix CLI after an environment refresh. |
DLPX-84598 | A sysadmin user cannot view actions initiated by a different sysadmin user. | None |
DLPX-84710 | Improving the handling of missing networking devices after instance type migration. | None |
DLPX-86181 | Provision, refresh, rewind, or start operations on a Solaris-hosted VDB with NFSv4 enabled may get stuck indefinitely, due to the mount process getting stuck on the Solaris NFS client. | Switch the NFS protocol to v3 using the Delphix Continuous Data Engine CLI, manually terminate the stuck mount processes on the Solaris host, then re-attempt the failed Delphix operation. |
DLPX-87213 | When relocating multiple terabytes of data (either via block-to-object storage migration or device removal), management of the engine can become unresponsive for a lengthy period of time (30+ mins), dependent on the dataset size and workload. | None, the data relocation and concurrent IO workloads will continue in the background. If the engine cannot be accessed after one hour, contact Delphix Support for corrective actions. |
DLPX-88322 | If a datafile is added when a SnapSync job is running, provision or refresh to the snapshot generated by the SnapSync job will fail. | Take a new source snapshot (incremental is fine) and refresh the vPDB from the new snapshot. |
Version 16.0.0.0
Key | Summary | Workaround |
---|---|---|
DLPX-56944 | In Solaris 5.11 environments where the Delphix OS user shell is set to | Contact Delphix Support for corrective actions. |
DLPX-56978 | Certain usernames are not available for use, as they are reserved system words (e.g. "root", "postgres", "delphix"). | None |
DLPX-56979 | LDAP server test fails if authentication is set to DIGEST-MD5, but setup still works correctly. | None |
DLPX-57142 | The Job dashboard does not display the user that invoked each Job. | None |
DLPX-57412 | CLI parameters must be used exactly as described in documentation, including spelling and capitalization, or they are ignored. | None |
DLPX-57673 | Support bundle generation can be time consuming if the engine has a large number of core files to process. | None |
DLPX-57823 | Changing the Compliance Engine used by a VDB's masking job can lead to an internal error. | None |
DLPX-58185 | Changing a custom policy while it is running on an object can cause the policy execution to fail. | None |
DLPX-59473 | It is not possible to set a password policy that prevents an administrator from re-using a previous password, though this can be set for other users. | None |
DLPX-66155 | Restarting a Data Engine during a network throughput test is not recommended, as it may lead to a system stall. | None |
DLPX-77986 | On a Sybase host with multiple Sybase instances, if access to the first instance picked up for discovery fails due to invalid credentials, the discovery job will exit immediately – preventing discovery of the remaining instances. | Fix any credential failures. |
DLPX-78589 | During an upgrade, when the Data Engine tries to run the ASE | When the ASE |
DLPX-81478 | If a transaction log is taken using the | Change the backup script creating transaction logs to ingest FULL backups. |
DLPX-81559 | After upgrading an Oracle VDB from 12c to 19c, VDB refresh fails with "Failed to mount database instance" due to ORA-01130 or ORA-00201 errors. | Update the VDB parameters (either directly or via a VDB Config Template). See this knowledge base article. |
DLPX-84598 | A sysadmin user cannot view actions initiated by a different sysadmin user. | None |
DLPX-84710 | Improved handling of missing networking devices after instance type migration. | None |
DLPX-86181 | Provision, refresh, rewind or start operations on a virtual database, on a Solaris host with NFSv4 enabled, may become stuck indefinitely due to the mount process getting stuck on the Solaris NFS client. | Switch the NFS protocol to v3 using the Data Engine CLI, manually terminate the stuck mount processes on the Solaris host, and re-attempt the failed Delphix operation. |
DLPX-87213 | When relocating multiple terabytes of data, either via block to object storage migration or device removal, management of the engine can become unresponsive for a lengthy period of time (e.g. 30+ mins), dependent on the dataset size and workload. | None, the data relocation and concurrent IO workloads will continue in the background. If the engine cannot be accessed after one hour, contact Delphix Support for corrective actions. |
DLPX-88040 | Steps have been taken to make the users understand the reason of disabling some datasets during SDD Replication. | None |
DLPX-88322 | Provisioning or refreshing from a snapshot of an Oracle vPDB may fail during the renaming the data files stage if a data file is added during a SnapSync job. | Take a new source snapshot (incremental is fine) and refresh the vPDB from the new snapshot. |
Version 15.0.0.0
Key | Summary | Workaround |
---|---|---|
DLPX-56944 | In Solaris 5.11 Environments where Delphix OS user shell is set to csh, host parameters may be improperly parsed leading to Environment refresh and other job failures. | Contact Delphix Support for corrective actions. |
DLPX-56978 | Certain usernames are not available for use as they are reserved system words (e.g. "root", "postgres", "delphix"). | None |
DLPX-56979 | LDAP server test fails if authentication is set to DIGEST-MD5, but setup still works correctly. | None |
DLPX-57142 | The Job dashboard does not display the user that invoked each Job. | None |
DLPX-57412 | CLI parameters must be used exactly as described in documentation, including spelling and capitalization, or they are ignored | None |
DLPX-57673 | Support bundle generation can be time consuming if the engine has a large number of core files to process. | None |
DLPX-57823 | Changing the masking engine used by a VDB's masking job can lead to an internal error. | None |
DLPX-58185 | Changing a Custom Policy while it is running on an object can cause the Policy execution to fail. | None |
DLPX-59473 | It is not possible to set a password policy that prevents an Administrator from re-using a previous password, though this can be set for other users. | None |
DLPX-66155 | Restarting a Delphix Engine during a network throughput test is not recommended as it may lead to a system hang. | None |
DLPX-66860 | For SSO/SAML, ADFS requires explicit rule to transform emailAddress attribute into nameid. | Create an explicit rule in ADFS that transforms the emailAddress attribute into a nameid. The rule type must be "Transform an incoming claim". The incoming claim type must be "Email address" and the outgoing claim type "Name ID". The nameid format must be "Email address". |
DLPX-77986 | On a sybase host with multiple Sybase instances, If access to the first instance picked up for discovery fails due to invalid credentials, the discovery job will exit immediately preventing discovery of the remaining instances. | Fix any credential failures. |
DLPX-78589 | During the upgrade, when Delphix was trying to run the ASE "UNMOUNT" command while trying to quiesce VDBs, UNMOUNT command got hung as this command doesn't run under a timeout and due to this upgrade job stalled. | When the ASE UNMOUNT command is hung, the ASE instance must be restarted. |
DLPX-81478 | If a transaction log is taken using the standby_access option for a SAP ASE database, the validated sync worker will not be able to restore that log, and will fail with Delphix fatal exception (as Delphix currently does not support this option). | Change the backup script creating transaction logs to Ingest FULL backups |
DLPX-81559 | After upgrading an Oracle VDB from 12c to 19c, VDB refresh fails with "Failed to mount database instance" due to ORA-01130 or ORA-00201 errors. | Update the VDB parameters (either directly or via a VDB Config Template). See this knowledge base article. |
DLPX-83643 | After engine upgrade or after disable and enable of vPDB, NFS version in GUI/API may be incorrect if - it is a vPDB in a vCDB, it was mounted with NFSv3 and now the host supports NFSv4 mounts. This condition corrects itself on the next refresh operation. | Perform a vPDB refresh operation to update the NFS protocol version to 4. |
DLPX-84253 | Users should be able to delete Delphix-generated CA certificate if no dependencies exist. | Customer may mark the fault Ignored, but will need to be aware the CA certificate will still appear in Truststore. |
DLPX-84598 | A sysadmin user cannot view actions initiated by a different sysadmin user. | None |
DLPX-84710 | Improved handling of missing networking devices after instance type migration | None |
DLPX-86181 | Provision, refresh, rewind or start operations on a virtual database on a Solaris host with NFSv4 enabled may become stuck indefinitely due to mount process getting stuck on the Solaris NFS client. | Switch the NFS protocol to v3 using the Delphix engine CLI, manually terminate the stuck mount processes on the Solaris host and re-attempt the failed Delphix operation. |
DLPX-87213 | When relocating multiple terabytes of data either via block to object storage migration or device removal, management of the engine can become unresponsive for a lengthy period of time (e.g. 30+ mins), dependent on the dataset size and workload. | None, the data relocation and concurrent IO workloads will continue in the background. If the engine cannot be accessed after one hour, contact Delphix Support for corrective actions. |
DLPX-87320 | Exporting a VDB or vPDB to ASM will fail with ORA-32771 when the database has a bigfile temporary tablespace. | If using the move-to-asm script, use an older version of script from Delphix engine v6.0.15.0 or earlier. No workaround if attempting to export a VDB or vPDB to a physical ASM or Exadata database when the database has a bigfile temporary tablespace using the database export CLI. |
DLPX-87702 | Provisioning an Oracle VDB/vPDB fails with "ORA-03214: File Size specified is smaller than minimum required" when tempfiles have a non-default local uniform size. | Recreate temp files in the source database with size smaller than 50MB and take a new snapshot. |
Version 14.0.0.0
Key | Summary | Workaroound |
---|---|---|
DLPX-56944 | In Solaris 5.11 environments where Delphix OS user shell is set to | Contact Delphix Support for corrective actions. |
DLPX-56978 | Certain usernames are not available for use, as they are reserved system words (e.g. "root", "postgres", "delphix"). | None |
DLPX-56979 | LDAP server test fails if authentication is set to DIGEST-MD5, but setup still works correctly. | None |
DLPX-57142 | The Job dashboard does not display the user that invoked each Job. | None |
DLPX-57412 | CLI parameters must be used exactly as described in documentation, including spelling and capitalization, or they are ignored. | None |
DLPX-57673 | Support bundle generation can be time consuming if the engine has a large number of core files to process. | None |
DLPX-57823 | Changing the Compliance Engine used by a VDB's masking job can lead to an internal error. | None |
DLPX-58185 | Changing a Custom Policy while it is running on an object can cause the Policy execution to fail. | None |
DLPX-58226 | Completed cleanup jobs may still show as running, even after an upgrade. | None |
DLPX-59473 | It is not possible to set a password policy that prevents an administrator from re-using a previous password, though this can be set for other users. | None |
DLPX-66155 | Restarting a Delphix Engine during a network throughput test is not recommended as it may lead to a system hang. | None |
DLPX-66860 | For SSO/SAML, ADFS requires explicit rule to transform | Create an explicit rule in ADFS that transforms the |
DLPX-77849 | An excessive number of connections to the SQL Server instance can cause infrastructure issues, leading the LSASS.exe to crash and the host to reboot. | Rather than using a Windows domain user for authentication, switch the dSource to use a database user. It seems SQL Server may be able to handle the massive number of connections that Delphix is establishing for each dSource better than Windows LSASS.EXE. |
DLPX-77986 | On a sybase host with multiple Sybase instances, If access to the first instance picked up for discovery fails due to invalid credentials, the discovery job will exit immediately preventing discovery of the remaining instances. | Fix any credential failures. |
DLPX-78589 | During the upgrade, when Delphix was trying to run the ASE "UNMOUNT" command while trying to quiesce VDBs, UNMOUNT command got hung as this command does not run under a timeout and due to this, the upgrade job stalled. | When the ASE UNMOUNT command is hung, the ASE instance must be restarted. |
DLPX-80193 | A vague error message appears in a case where provisioning fails due to a database being in read-only mode. | Change source database to read-write, create a backup and sync to the dSource and provision VDB. |
DLPX-81300 | Windows Environment Add/Refresh operations may fail if the iSCSI Initiator Name is not a valid IQN. | Set the initiator name to a valid name, e.g. iqn.1991-05.com.microsoft:10-43-47-42.qa-ad.delphix.com. The “Default” button can also be selected in Windows iSCSI configuration to reset to the default (valid) name. |
DLPX-81478 | If a transaction log is taken using the | Change the backup script creating transaction logs to Ingest FULL backups. |
DLPX-81559 | After upgrading an Oracle VDB from 12c to 19c, VDB refresh fails with "Failed to mount database instance" due to ORA-01130 or ORA-00201 errors. | Update the VDB parameters (either directly or via a VDB Config Template). See this knowledge base article. |
DLPX-83643 | After engine upgrade or after disable and enable of vPDB, NFS version in GUI/API may be incorrect; for a vPDB in a vCDB, it was mounted with NFSv3 and now the host supports NFSv4 mounts. This condition corrects itself on the next refresh operation. | Perform a vPDB refresh operation to update the NFS protocol version to 4. |
DLPX-84075 | SQL Server VDB Refresh operations may fail if the PowerShell command | Go to the temp directory below and delete all files from it:
|
DLPX-84253 | Users should be able to delete Delphix-generated CA certificate if no dependencies exist. | Mark related faults as Ignored, but note that the CA certificate will still appear in Truststore. |
DLPX-84598 | A sysadmin user cannot view actions initiated by a different sysadmin user. | None |
DLPX-84710 | Improved handling of missing networking devices after instance type migration required. | None |
DLPX-86181 | Provision, refresh, rewind, or start operations on a virtual database on a Solaris host with NFSv4 enabled may become stuck indefinitely due to mount process getting stuck on the Solaris NFS client. | Switch the NFS protocol to v3 using the Delphix engine CLI, manually terminate the stuck mount processes on the Solaris host and re-attempt the failed Delphix operation. |
DLPX-86894 | After a canceled refresh operation, VDB refresh or delete may fail due to error code | Disable the VDB and re-attempt the failed operation. |
DLPX-87320 | Exporting a VDB or vPDB to ASM fails with "ORA-32771: cannot add file to bigfile tablespace" when the database has a bigfile temporary tablespace | If using the No workaround if attempting to export a VDB or vPDB to a physical ASM or Exadata database using the |
Version 13.0.0.0
Key | Summary | Workaround |
DLPX-56944 | In Solaris 5.11 environments where the Delphix OS user shell is set to | Contact Delphix Support for corrective actions. |
DLPX-56978 | Certain usernames are not available for use, as they are reserved system words (e.g. "root", "postgres", "delphix"). | None |
DLPX-56979 | LDAP server test fails if authentication is set to DIGEST-MD5, but setup still works correctly. | None |
DLPX-57142 | The Job dashboard does not display the user that invoked each job. | None |
DLPX-57412 | CLI parameters must be used exactly as described in documentation, including spelling and capitalization, or they are ignored. | None |
DLPX-57673 | Support bundle generation can be time consuming if the engine has a large number of core files to process. | None |
DLPX-57823 | Changing the Compliance engine used by a VDB's masking job can lead to an internal error. | None |
DLPX-58185 | Changing a Custom Policy while it is running on an object can cause the Policy execution to fail. | None |
DLPX-58226 | Completed cleanup jobs may still show as running, even after an upgrade. | None |
DLPX-59473 | It is not possible to set a password policy that prevents an Administrator from re-using a previous password, though this can be set for other users. | None |
DLPX-66155 | Restarting a Delphix Engine during a network throughput test is not recommended, as it may lead to a system hang. | None |
DLPX-66860 | For SSO/SAML, ADFS requires an explicit rule to transform the emailAddress attribute into nameid. | Create an explicit rule in ADFS that transforms the emailAddress attribute into a nameid. The rule type must be "Transform an incoming claim". The incoming claim type must be "Email address" and the outgoing claim type is "Name ID". The nameid format must be "Email address". |
DLPX-77849 | An excessive number of connections to the SQL Server instance can cause infrastructure issues, leading the LSASS.exe to crash and the host to reboot. | Rather than using a Windows domain user for authentication, switch the dSource to use a database user. It seems SQL Server may be able to handle the massive number of connections that Delphix is establishing for each dSource better than Windows LSASS.exe. |
DLPX-77986 | On a Sybase host with multiple Sybase instances, if access to the first instance picked up for discovery fails due to invalid credentials, the discovery job will exit immediately (preventing discovery of the remaining instances). | Fix any credential failures. |
DLPX-78589 | During an upgrade, when Delphix tried to run the ASE "UNMOUNT" command, while trying to quiesce VDBs, the UNMOUNT command got hung (as this command doesn't run under a timeout); due to this, the upgrade job stalled. | When the ASE UNMOUNT command is hung, the ASE instance must be restarted. |
DLPX-80193 | Vague error message appears in a case where provisioning fails due to a database being in read-only mode. | Change source the database to read-write, create a backup, sync to the dSource, and provision VDB. |
DLPX-81300 | Windows Environment Add/Refresh operations may fail if the iSCSI Initiator Name is not a valid IQN. | Set the initiator name to a valid name, eg: iqn.1991-05.com.microsoft:10-43-47-42.qa-ad.delphix.com. The “Default” button can also be selected in the Windows iSCSI configuration to reset to the default (valid) name. |
DLPX-81478 | If a transaction log is taken using the | Change the backup script creating transaction logs to ingest FULL backups. |
DLPX-81559 | After upgrading an Oracle VDB from 12c to 19c, a VDB refresh fails with, "Failed to mount database instance" due to ORA-01130 or ORA-00201 errors. | Update the VDB parameters (either directly or via a VDB Config Template). See this knowledge base article. |
DLPX-83643 | After engine upgrade or after disable and enable of a vPDB, the NFS version in the GUI/API may be incorrect if it's a vPDB in a vCDB; this means it was mounted with NFSv3, and now the host supports NFSv4 mounts. This condition corrects itself on the next refresh operation. | Perform a vPDB refresh operation to update the NFS protocol version to 4. |
DLPX-84075 | SQL Server VDB Refresh operations may fail if the PowerShell command | Go to the following temp directory and delete all the files from it: |
DLPX-84253 | Unable to delete Delphix-generated CA certificate if no dependencies exist. | Mark the fault Ignored, but the CA certificate will still appear in Truststore. |
DLPX-84598 | A sysadmin user cannot view actions initiated by a different sysadmin user. | None |
DLPX-84710 | Improved handling of missing networking devices after instance type migration required. | None |
DLPX-85770 | If a Oracle VDB/vPDB is already enabled, a Self-Service container | Retry the failed VDB/vPDB start or self-service container start operation, it should succeed without any error. |
DLPX-86181 | Provision, refresh, rewind or start operations on a virtual database on a Solaris host with NFSv4 enabled may become stuck indefinitely due to the mount process getting stuck on the Solaris NFS client. | Switch the NFS protocol to v3 using the Delphix engine CLI, manually terminate the stuck mount processes on the Solaris host and re-attempt the failed Delphix operation. |
DLPX-87006 | Refresh operation fails for the self service containers having ordered sources. | None. Contact Delphix support for corrective actions. |
Version 12.0.0.0
Key | Summary | Workaround |
---|---|---|
DLPX-56944 | In Solaris 5.11 environments where the Delphix OS user shell is set to csh, host parameters may be improperly parsed, leading to environment refresh and other job failures. | Contact Delphix Support for corrective actions. |
DLPX-56978 | Certain usernames are not available for use, as they are reserved system words (e.g. "root", "postgres", "delphix"). | None |
DLPX-56979 | LDAP server test fails if authentication is set to DIGEST-MD5, but setup still works correctly. | None |
DLPX-57142 | The Job dashboard does not display the user that invoked each Job. | None |
DLPX-57412 | CLI parameters must be used exactly as described in documentation, including spelling and capitalization, or they are ignored. | None |
DLPX-57673 | Support bundle generation can be time consuming if the engine has a large number of core files to process. | None |
DLPX-57823 | Changing the masking engine used by a VDB's masking job can lead to an internal error. | None |
DLPX-58185 | Changing a Custom Policy while it is running on an object can cause the Policy execution to fail. | None |
DLPX-58226 | A completed Cleanup Job, after upgrade, still shows as "running". | None |
DLPX-59473 | It is not possible to set a password policy that prevents an Administrator from re-using a previous password, though this can be set for other users. | None |
DLPX-66155 | Restarting a Delphix Engine during a network throughput test is not recommended, as it may lead to a system hang. | None |
DLPX-66860 | For SSO/SAML, ADFS requires explicit rule to transform emailAddress attribute into nameid. | Create an explicit rule in ADFS that transforms the emailAddress attribute into a nameid. The rule type must be "Transform an incoming claim". The incoming claim type must be "Email address" and the outgoing claim type is "Name ID". The nameid format must be "Email address". |
DLPX-77849 | An excessive number of connections to SQL Server Instances causes infrastructure issues and leads LSASS.exe to crash, and host to reboot. | Rather than using a Windows domain user for authentication, switch the dSource to use a database user. It seems SQL Server may be able to handle the massive number of connections that Delphix is establishing for each dSource better than Windows LSASS.EXE. |
DLPX-77986 | On a sybase host with multiple Sybase instances, If access to the first instance picked up for discovery fails due to invalid credentials, the discovery job will exit immediately preventing discovery of the remaining instances. | Fix any credential failures |
DLPX-78589 | During the upgrade, when Delphix was trying to run the ASE "UNMOUNT" command while trying to quiesce VDBs, the UNMOUNT command gets hung (as this command doesn't run under a timeout and due to this, the upgrade job stalled). | When the ASE UNMOUNT command is hung, the ASE instance must be restarted. |
DLPX-80193 | Provide a proper error message in case provisioning fails due to database being in read-only mode. | Change source database to read-write, create a backup and sync to the dSource, and provision VDB. |
DLPX-80920 | A failed Delphix Engine upgrade can cause plugin operations to fail with "grpc_status 14". | Verify the upgrade and then apply the upgrade. If the issue occurs after a failed upgrade, restarting the management stack will resolve the issue. |
DLPX-81300 | Windows environment Add/Refresh operations may fail if the iSCSI Initiator Name is not a valid IQN. | Set initiator name to a valid name, eg: iqn.1991-05.com.microsoft:10-43-47-42.qa-ad.delphix.com The “Default” button can also be selected in the windows iSCSI configuration to reset to the default (valid) name. |
DLPX-81478 | If a transaction log is taken using the standby_access option for a SAP ASE database, the validated sync worker will not be able to restore that log, and will fail with Delphix fatal exception (as Delphix currently does not support this option). | Change the backup script creating transaction logs to ingest FULL backups. |
DLPX-81559 | After upgrading an Oracle VDB from 12c to 19c, VDB refresh fails with "Failed to mount database instance", due to ORA-01130 or ORA-00201 errors. | Update the VDB parameters (either directly or via a VDB Config Template). See this knowledge base article. |
DLPX-83643 | After an engine upgrade or after the disable/enable of a vPDB, the NFS version in the GUI/API may be incorrect if it's a vPDB in a vCDB or it was mounted with NFSv3 (and now the host supports NFSv4 mounts). This condition corrects itself on the next refresh operation. | Perform a vPDB refresh operation to update the NFS protocol version to 4. |
DLPX-84075 | SQL Server VDB Refresh operations may fail if the PowerShell command [IO.Path]::GetTempFileName() returns no value. | Go to the below mentioned temp directory, and delete all the files from it: C:\Window\ServiceProfiles\NetworkService\appdata\local\temp. |
DLPX-84253 | Users should be able to delete the Delphix-generated CA certificate, if no dependencies exist. | Users may mark the fault Ignored, but will need to be aware the CA certificate will still appear in Truststore. |
DLPX-84598 | Sysadmin users cannot view actions initiated by different sysadmin users. | None |
DLPX-84710 | Improved handling of missing networking devices after instance type migration. | None |
DLPX-85469 | JSON file masking does not support the use of a multi-column algorithm on (a) Fields in two or more different arrays (b) Fields at different levels in a single multi-dimensional array. | None |
DLPX-85770 | If an Oracle VDB/vPDB is already enabled, a self-service container start operation or the VDB/vPDB enable operation may fail with: exception.oracle.vdb.database.exists.enable.not.allowed/ exception.oracle.vdb.pdb.exists.enable.not.allowed | Retry the failed VDB/vPDB start or self-service container start operation, it should succeed without any error. |
DLPX-86109 | Oracle VDB unquiesce/enable may fail after a failed quiesce/disable on 10.0.0.X or 11.0.0.X. | To get disabled Oracle VDBs back to an enabled state, manually disable sources via the Delphix CLI and enable them back via the Delphix CLI/UI. |
DLPX-86181 | Provision, refresh, rewind, or start operations on a virtual database on a Solaris host with NFSv4 enabled may become stuck indefinitely due to mount process getting stuck on the Solaris NFS client. | Switch the NFS protocol to v3 using the Delphix engine CLI, manually terminate the stuck mount processes on the Solaris host and re-attempt the failed Delphix operation. |
DLPX-86344 | A failed Delphix Engine upgrade can cause plugin operation to fail with grpc_status 14. | Verify the upgrade and then apply the upgrade. If the issue is hit after a failed upgrade, Restarting the management stack will resolve the issue. |
DLPX-86842 | If there is any detached or unlinked Oracle dSource, upgrade failure may occur during `verify upgrade` job while upgrading to 12.0.0.0. | Re-link or delete the dSources before trying to upgrade to 12.0.0.0, OR upgrade to version 11.0.0.0 or 13.0.0.0. |
DLPX-87006 | Refresh operation fails for the self service containers having ordered sources. | None. Contact Delphix support for corrective actions. |
Version 11.0.0.0
Key | Summary | Workaround |
---|---|---|
DLPX-56978 | Certain usernames are not available for use, as they are reserved system words (e.g. "root", "postgres", "delphix"). | None |
DLPX-56979 | LDAP server test fails if authentication is set to DIGEST-MD5, but setup still works correctly. | None |
DLPX-57142 | The Job dashboard does not display the user that invoked each job. | None |
DLPX-57412 | CLI parameters must be used exactly as described in documentation, including spelling and capitalization, or they are ignored. | None |
DLPX-57673 | Support bundle generation can be time consuming if the engine has a large number of core files to process. | None |
DLPX-57823 | Changing the Continuous Compliance engine used by a VDB's masking job can lead to an internal error. | None |
DLPX-58185 | Changing a Custom Policy while it is running on an object can cause the Policy execution to fail. | None |
DLPX-58226 | Completed Cleanup Job, after upgrade, will still show as running. | None |
DLPX-59473 | It is not possible to set a password policy that prevents an Administrator from re-using a previous password, though this can be set for other users. | None |
DLPX-66155 | Restarting a Delphix engine during a network throughput test is not recommended, as it may lead to a system hang. | None |
DLPX-66860 | For SSO/SAML, ADFS requires an explicit rule to transform emailAddress attribute into nameid. | Create an explicit rule in ADFS that transforms the emailAddress attribute into a nameid. The rule type must be "Transform an incoming claim". The incoming claim type must be "Email address" and the outgoing claim type "Name ID". The nameid format must be "Email address". |
DLPX-77849 | Excessive number of connections to SQL Server instance causes infrastructure issues and leads the LSASS.exe to crash and the host to reboot. | Rather than using a Windows domain user for authentication, switch the dSource to use a database user. SQL Server should be able to handle the massive number of connections that Delphix is establishing for each dSource better than LSASS.EXE. |
DLPX-77986 | On a Sybase host with multiple Sybase instances, if access to the first instance picked up for discovery fails due to invalid credentials, the discovery job will exit immediately, preventing discovery of the remaining instances. | Fix any credential failures. |
DLPX-78589 | When Delphix tries to run the ASE "UNMOUNT" command (while trying to quiesce VDBs) during the upgrade, the UNMOUNT command gets hung up (this command does not have a timeout). Because of this, the upgrade job stalled. | When the ASE UNMOUNT command is hung up, the ASE instance must be restarted. |
DLPX-80193 | Provides a proper error message in case provisioning fails due to database being in read-only mode. | Change the source database to read-write, create a backup, and sync to the dSource, then provision the VDB. |
DLPX-80920 | A failed Delphix engine upgrade can cause plugin operation to fail with "grpc_status 14". | Verify the upgrade and then apply the upgrade. If the issue occurs after a failed upgrade, restarting the management stack will resolve the issue. |
DLPX-81300 | Windows Environment Add/Refresh operations may fail if the iSCSI Initiator Name is not a valid IQN. | Set the initiator name to a valid name, eg: iqn.1991-05.com.microsoft:10-43-47-42.qa-ad.delphix.com. The “Default” button can also be selected in the Windows iSCSI configuration to reset to the default (valid) name. |
DLPX-81478 | If the transaction log is taken using the `standby_access` option for a SAP ASE database, the validated sync worker will not be able to restore that log and will fail with a fatal exception, as Delphix currently does not support this option. | Change the backup script creating transaction logs. Ingest FULL backups. |
DLPX-81559 | After upgrading an Oracle VDB from 12c to 19c, VDB refresh fails with "Failed to mount database instance", due to ORA-01130 or ORA-00201 errors. | Update the VDB parameters (either directly or via a VDB config template). See this knowledge base article |
DLPX-83430 | Initial configuration of Syslog breaks most of the pre-existing appenders. | Restart the management stack. |
DLPX-83643 | After an engine upgrade or after disable and enable of vPDB, the NFS version in the GUI/API may be incorrect if it's a vPDB in a vCDB, it was mounted with NFSv3 and now the host supports NFSv4 mounts. This condition corrects itself on the next refresh operation. | Perform a vPDB refresh operation to update the NFS protocol version to 4. |
DLPX-84075 | SQL Server VDB Refresh operations may fail if the PowerShell command [IO.Path]::GetTempFileName() returns no value. | Go to the below mentioned temp directory and delete all files from it: C:\Window\ServiceProfiles\NetworkService\appdata\local\temp. |
DLPX-84253 | Users should be able to delete Delphix-generated CA certificate if no dependencies exist. | User may mark the fault as ignored, but will need to be aware the CA certificate will still appear in TrustStore. |
DLPX-84598 | A sysadmin user cannot view actions initiated by different sysadmin user | None |
DLPX-85578 | Replaced the Win32_Volume class output with the mountvol output to fetch volumeId for Delphix iSCSI mount points. | None |
DLPX-85770 | If an Oracle VDB/vPDB is already enabled, a Self-Service container start operation or the VDB/vPDB enable operation may fail with exception.oracle.vdb.database.exists.enable.not.allowed/ exception.oracle.vdb.pdb.exists.enable.not.allowed. | Retry the failed VDB/vPDB start or Self-Service container start operation, it should succeed without any error. |
DLPX-86109 | Oracle VDB unquiesce/enable may fail after a failed quiesce/disable on 10.0.0.X or 11.0.0.X. | To get disabled Oracle VDBs back to Enabled state, manually disable such sources via the Delphix CLI and enable them back via the Delphix CLI/UI. |
DLPX-86181 | Provision, refresh, rewind, or start operations on a virtual database on a Solaris host with NFSv4 enabled may become stuck indefinitely due to the mount process getting stuck on the Solaris NFS client. | Switch the NFS protocol to v3 using the Delphix engine CLI, manually terminate the stuck mount processes on the Solaris host and re-attempt the failed Delphix operation. |
Version 10.0.0.0
Key | Summary | Workaround |
---|---|---|
DLPX-56944 | In Solaris 5.11 Environments where Delphix OS user shell is set to csh, host parameters may be improperly parsed leading to Environment refresh and other job failures. | Contact Delphix Support for corrective actions. |
DLPX-56978 | Certain usernames are not available for use as they are reserved system words (e.g. "root", "postgres", "delphix") | None |
DLPX-56979 | LDAP server test fails if authentication is set to DIGEST-MD5, but setup still works correctly | None |
DLPX-57142 | The Job dashboard does not display the user that invoked each Job | None |
DLPX-57412 | CLI parameters must be used exactly as described in documentation, including spelling and capitalization, or they are ignored | None |
DLPX-57673 | Support bundle generation can be time consuming if the engine has a large number of core files to process | None |
DLPX-57823 | Changing the masking engine used by a VDB's masking job can lead to an internal error | None |
DLPX-58185 | Changing a Custom Policy while it is running on an object can cause the Policy execution to fail | Disable/enable after fixing the problem |
DLPX-58226 | Completed Cleanup Job, After Upgrade, Still Shows as Running | None |
DLPX-59473 | It is not possible to set a password policy that prevents an Administrator from re-using a previous password, though this can be set for other users | None |
DLPX-66155 | Restarting a Continuous Data Engine during a network throughput test is not recommended as it may lead to a system hang. | Create an explicit rule in ADFS that transforms the emailAddress attribute into a nameid. The rule type must be "Transform an incoming claim". The incoming claim type must be "Email address" and the outgoing claim type "Name ID". The nameid format must be "Email address". |
DLPX-66860 | For SSO/SAML, ADFS requires explicit rule to transform emailAddress attribute into nameid. | Rather than using a Windows domain user for authentication switch the dSource to use a database user. It seems SQL Server may be able to handle the massive number of connections that Continuous Data is establishing for each dSource better than Windows LSASS.EXE. |
DLPX-77849 | Excessive number of connections to SQL Server Instance observed by Delphix Environment User. This causes infra issues and leads to LSASS.exe to crash and host to reboot | Rather than using a Windows domain user for authentication switch the dSource to use a database user. It seems SQL Server may be able to handle the massive number of connections that Delphix is establishing for each dSource better than Windows LSASS.EXE. |
DLPX-77986 | On a SAP ASE host with multiple SAP ASE instances, If access to the first instance picked up for discovery fails due to invalid credentials, the discovery job will exit immediately preventing discovery of the remaining instances. | Fix any credential failures |
DLPX-78589 | During the upgrade, when Delphix was trying to run the SAP ASE "UNMOUNT" command while trying to quiesce VDBs, UNMOUNT command hung as this command doesn't run under a timeout and due to this upgrade job stalled. | When the ASE UNMOUNT command is hung, the ASE instance must be restarted. |
DLPX-80193 | Provide proper error message in case provisioning fails due to database is in read-only mode. | Change source database to read-write, create a backup and sync to the dSource and provision VDB. |
DLPX-80920 | A failed Delphix engine upgrade can cause plugin (for plugins using docker runtime) operation to fail with grpc_status 14. |
|
DLPX-81300 | Windows Environment Add/Refresh operations may fail if the iSCSI Initiator Name is not a valid IQN | Set initiator name to a valid name, eg: iqn.1991-05.com.microsoft:10-43-47-42.qa-ad.delphix.com. The “Default” button can also be selected in windows iscsi configuration to reset to the default ( valid ) name. |
DLPX-81478 | If transaction log is taken using `standby_access` option for SAP ASE database, the validated sync worker will not be able to restore that log and will fail with Delphix Fatal Exception as Delphix currently doesnt support this option. | Change the backup script creating transaction logs Ingest FULL backups |
DLPX-81559 | After upgrading an Oracle VDB from 12c to 19c, the VDB refresh fails with "Failed to mount database instance" due to ORA-01130 or ORA-00201 errors. | Update the VDB parameters (either directly or via a VDB Config Template). For more information, please see KBA6234 |
DLPX-83643 | If you upgrade the engine or disable and then enable a virtual PDB, the displayed NFS version in the GUI or API might be incorrect. This happens if the virtual PDB is inside a virtual CDB and was previously mounted with NFSv3, but the host now supports NFSv4 mounts. However, the issue will automatically resolve itself during the next refresh operation. | Perform a vPDB refresh operation to update the NFS protocol version to 4. |
DLPX-84075 | SQL Server VDB Refresh operations may fail if the PowerShell command [IO.Path]::GetTempFileName() returns no value" | Go to the below mentioned temp directory, and delete all the files from it: C:\Window\ServiceProfiles\NetworkService\appdata\local\temp |
DLPX-84598 | sysadmin user cannot view actions initiated by different sysadmin user | Perform an export with the same unique name as of the VDB and then manually change the physical database’s unique name. |
DLPX-85493 | MSSQL: Linking and AttachSource operations will fail with unnecessary permissions of source user on the staging host and staging database. This issue can be seen from 6.0.17.0 onwards. | Adding source user to the staging instance with read permission on master database and Giving write permission on connector directory path {Connector_Installation}/sourceValidation |
Version 9.0.0.0
Key | Summary | Workaround |
---|---|---|
DLPX-77849 | Excessive number of connections to SQL Server Instance observed by Delphix Environment User. This causes infra issues and leads to LSASS.exe to crash and host to reboot | Rather than using a Windows domain user for authentication switch the dSource to use a database user. It seems SQL Server may be able to handle the massive number of connections that Delphix is establishing for each dSource better than Windows LSASS.EXE. |
DLPX-84977 | For RAC environments, export of an Oracle VDB to a database with a new unique name is not supported. | Perform the export with the same unique name as of the VDB and then manually change the physical database’s unique name. |
DLPX-84423 | Export operation does not retain the read-only mode in the newly converted physical database after an in-place conversion of a read-only Oracle VDB or vPDB | None |
DLPX-84598 | sysadmin user cannot view actions initiated by different sysadmin user | None |
DLPX-84655 | A false warning message that listener registration was not successful is posted when enabling a VDB or a vCDB, users can ignore this message. | Ignore the warning message. |
DLPX-84679 | Unable to add Staging push PDB if Staging Environment has more than one repository. | From the Add dSource Wizard dSource Configuration screen for Staging Push.
|
DLPX-85076 | Instance init file is not copied to $ORACLE_BASE_CONFIG/dbs during staging push dSource linking | Specify the pfile parameter in the startup command as
|
Version 8.0.0.0
Key | Summary | Workaround |
---|---|---|
DLPX-77849 | Excessive number of connections to SQL Server Instance observed by Delphix Environment User. This causes infra issues and leads to LSASS.exe to crash and host to reboot | Rather than using a Windows domain user for authentication switch the dSource to use a database user. It seems SQL Server may be able to handle the massive number of connections that Delphix is establishing for each dSource better than Windows LSASS.EXE. |
DLPX-84679 | Unable to add Staging push PDB if Staging Environment has more than one repository. | From the Add dSource Wizard dSource Configuration screen for Staging Push.
|
DLPX-85076 | Instance init file is not copied to $ORACLE_BASE_CONFIG/dbs during staging push dSource linking | Specify the pfile parameter to startup command as
|
Version 7.0.0.0
Upgrades from versions < 6.0.17.0 to any version between 6.0.17.0 and 7.0.0.0 on a replication target engine may fail due to the management services being down, which will require a support call. This applies to “Delay the Reboot” or “Apply Now” upgrades.
Key | Summary | Workaround |
---|---|---|
DLPX-77849 | Excessive number of connections to SQL Server Instance observed by Delphix Environment User. This causes infra issues and leads to LSASS.exe to crash and host to reboot | Rather than using a Windows domain user for authentication switch the dSource to use a database user. It seems SQL Server may be able to handle the massive number of connections that Delphix is establishing for each dSource better than Windows LSASS.EXE. |
DLPX-84255 | In a Single Engine Continuous Vault product, adding a new Sybase dSource to a locked group may result in the background environment monitoring process to stop working. | No workaround. |
DLPX-84495 | If upgrading from versions < 6.0.17.0 to any version between 6.0.17.0 and 7.0.0.0, a support call is needed. | Call support. |
DLPX-84679 | Unable to add Staging push PDB if Staging Environment has more than one repository | From the Add dSource Wizard dSource Configuration screen for Staging Push.
|
DLPX-85076 | Instance init file is not copied to $ORACLE_BASE_CONFIG/dbs during staging push dSource linking | Specify the pfile parameter to startup command as
|
Version 6.0.17.0
Key | Summary | Workaround |
---|---|---|
DLPX-77849 | Excessive number of connections to SQL Server Instance observed by Delphix Environment User. This causes infra issues and leads to LSASS.exe to crash and host to reboot | Rather than using a Windows domain user for authentication switch the dSource to use a database user. It seems SQL Server may be able to handle the massive number of connections that Delphix is establishing for each dSource better than Windows LSASS.EXE. |
DLPX-66860 | For SSO/SAML, ADFS requires explicit rule to transform emailAddress attribute into nameid. | Create an explicit rule in ADFS that transforms the {{emailAddress}} attribute into a {{nameid}}. The rule type must be "Transform an incoming claim". The incoming claim type must be "Email address" and the outgoing claim type "Name ID". The nameid format must be "Email address". |
DLPX-83622 | In 6.0.15.0 and 6.0.16.0, Fluentd gems from plugins were installed in the base Fluentd. These left over gems can cause Fluentd to fail post-upgrade. | No workaround. |
DLPX-83643 | After engine upgrade or after a disable and enable of a vPDB, the NFS version in GUI/API may be incorrect (if it's a vPDB in a vCDB, it was mounted with NFSv3 and now the host supports NFSv4 mounts). This condition corrects itself on the next refresh operation. | Perform a vPDB refresh operation to update the NFS protocol version to 4. |
DLPX-83575 | The port in the connection string for a vPDB in a Linked CDB may be shown incorrectly when it is registered to a non-default listener. | Use the port in the connection string of the CDB to connect. |
Version 6.0.16.0
Key | Summary | Workaround |
---|---|---|
DLPX-77849 | Excessive number of connections to SQL Server Instance observed by Delphix Environment User. This causes infra issues and leads to LSASS.exe to crash and host to reboot | Rather than using a Windows domain user for authentication switch the dSource to use a database user. It seems SQL Server may be able to handle the massive number of connections that Delphix is establishing for each dSource better than Windows LSASS.EXE. |
DLPX-82448 | Python2 has been deprecated and is being removed from the platform. During this removal, there are still trace artifacts of legacy Python versions being found on the engine. | No workaround. |
DLPX-81559 | After upgrading an Oracle VDB from 12c to 19c, the VDB refresh fails with "Failed to mount database instance" due to ORA-01130 or ORA-00201 errors. | Update the VDB parameters (either directly or via a VDB Config Template). For more information, please see KBA6234 |
DLPX-82169 | Provisioning a TDE-enabled vPDB to a CDB with a different patch level than the source CDB will fail. | Patch the dSource to match the target and provision again. If this is not an option, run datapatch on the vPDB, update the timeflow in engine metadata to a CONFIGURED state, restart the vPDB, and run SnapSync. This second option requires an engineering escalation. |
Version 6.0.15.0
Key | Summary | Workaround |
---|---|---|
DLPX-77849 | Excessive number of connections to SQL Server Instance observed by Delphix Environment User. This causes infra issues and leads to LSASS.exe to crash and host to reboot | Rather than using a Windows domain user for authentication switch the dSource to use a database user. It seems SQL Server may be able to handle the massive number of connections that Delphix is establishing for each dSource better than Windows LSASS.EXE. |
DLPX-81610 | If a tablespace is encrypted before an incremental snapshot is taken, provisioning from that snapshot can lead to the tablespace containing partially unencrypted data, which will not be accessible. | Take a snapshot with parameter "Force Full Backup" and provision a new vPDB/VDB with this snapshot. |
Version 6.0.14.0
Key | Summary | Workaround |
---|---|---|
DLPX-77849 | Excessive number of connections to SQL Server Instance observed by Delphix Environment User. This causes infra issues and leads to LSASS.exe to crash and host to reboot | Rather than using a Windows domain user for authentication switch the dSource to use a database user. It seems SQL Server may be able to handle the massive number of connections that Delphix is establishing for each dSource better than Windows LSASS.EXE. |
DLPX-80489 | TDE-enabled vPDB provisions failing with LOCAL_AUTOLOGIN configuration | Use a regular autologin wallet in the target CDB. |
DLPX-80822 | vPDB provision from a fully encrypted shared undo parent to local undo CDB results in a vPDB with new UNDO TS which is not encrypted | Encrypt the local undo space manually after provision, or with the Configure Clone hook point. |
DLPX-81125 | MSSQL Export fails when performed on a target with a Microsoft SQL Server instance running with the network service user | If you update the instance owner of the SQL server, you should refresh the environment to reflect the new user in the engine metadata. |
DLPX-81128 | Masking: Unable to create/edit a profile set from GUI | Profile set can be add/edited using API |
Version 6.0.13.0
Key | Summary | Workaround |
---|---|---|
DLPX-38908 | LogSync should automatically resolve faults for transient issues. | Manually resolve the faults generated when Oracle LogSync encounters transient issues. |
DLPX-57078 | Job cancel requests during provisioning are not processed until the end of the step. | Find and kill the Oracle |
DLPX-64386 | LogSync thread hangs when trying to remove temporary RMAN command file from source host toolkit directory. | Remove the |
DLPX-76382 | Force disable should succeed despite environmental problems. | No workaround. |
DLPX-77849 | Excessive number of connections to SQL Server Instance observed by Delphix Environment User. This causes infra issues and leads to LSASS.exe to crash and host to reboot | Rather than using a Windows domain user for authentication switch the dSource to use a database user. It seems SQL Server may be able to handle the massive number of connections that Delphix is establishing for each dSource better than Windows LSASS.EXE. |
DLPX-78412 | SCM/Talaria failure reason should be communicated in fault. | No workaround. |
DLPX-78986 | Prevent DSP connections for disabled cluster nodes. | No workaround. |
DLPX-79212 | While restoring full backups of file stream type database on open staging DB and taking snapshots, snapshots are consuming full space instead of referring to each snapshot. | No workaround. |
DLPX-79355 | V2P export throws an error when suspended and resumed at the Opening Database step. | Cancel the V2P export job and start the V2P export operation all over again. |
DLPX-79502 | SnapSync fails if more than 1000 tempfiles exist in the whole CDB. | No workaround. |
DLPX-79596 | DB files are getting deleted for staging DB if staging push dSource is forced disabled after performing a restore outside Delphix and then enabled again. | No workaround. |
DLPX-79833 | You can no longer select performance metric resolution for fluentd configurations. | No workaround. |
DLPX-80385 | Fluentd does not support deferred upgrades when upgrading to 6.0.13.0, and beyond, when starting from a prior release and using the Historic Splunk Insight solution. | Reboot after upgrade. |
Version 6.0.12.0
Key | Summary | Workaround |
---|---|---|
DLPX-67604 | Manually recovering a database after V2P from a snapshot of dSource fails with an error. | No workaround. |
DLPX-69775 | Updating Oracle credentials with an empty string throws an error when Simplified Connection Management is enabled. | Use the Delphix CLI to unset the user. |
DLPX-75209 | Network configuration is lost when changing EC2 instance type. | On Nitro-based instance types, use the virtual machine's virtual serial console and login to the sysadmin CLI, then add a DHCP address to the network interface. |
DLPX-75878 | The JDBC connection string for an Oracle vPDB does not get updated after a listener port change. | A second environment refresh will update the connection string for the vPDB. |
DLPX-77231 | When source discontinuity on the dSource is followed by resync on the livesource, one or more livesource workers may fail to start. This prevents livesource status from getting updated and the first snapshot from being taken after a resync. | No workaround. |
DLPX-77849 | Excessive number of connections to SQL Server Instance observed by Delphix Environment User. This causes infra issues and leads to LSASS.exe to crash and host to reboot | Rather than using a Windows domain user for authentication switch the dSource to use a database user. It seems SQL Server may be able to handle the massive number of connections that Delphix is establishing for each dSource better than Windows LSASS.EXE. |
DLPX-78689 | Oracle vPDB snapshot job fails after doing reset logs on a linked CDB. | Disable the vPDB and re-enable it to clear out the snapshot job errors. |
DLPX-78700 | Oracle vPDB source enable jobs for Oracle 21c are taking more than 15 minutes to complete. This issue is only seen during the first Oracle vPDB enable operation on Oracle 21c. | No workaround. |
Version 6.0.11.0
Key | Summary | Workaround |
---|---|---|
DLPX-44544 | A SnapSync of an Oracle standby dSource in Real-Time Apply mode sometimes calculates the snapshot's timestamp incorrectly. This can cause ORA-01194 or ORA-01152 errors when provisioning to a timestamp after the snapshot. | To provision from a snapshot of an Oracle standby dSource in Real-Time Apply mode, provision by SCN instead of timestamp. |
DLPX-57971 | The latest snapshot of a LiveSource may take a long time to show the SCN/timestamp range on its card in the GUI. | No workaround. |
DLPX-72123 | Detaching or deleting an Oracle dSource may fail on RAC environments due to the failure of deletion of RMAN backups on RAC and the operation needs to be retried with the force option. | If the detach or delete operation on an Oracle dSource fails, retry the command using the force option. |
DLPX-75209 | Network configuration is lost when changing EC2 instance type. | On Nitro-based instance types, use the virtual machine's virtual serial console and login to the sysadmin CLI, then add a DHCP address to the network interface. |
DLPX-77664 | Oracle SnapSync fails with | One of the following three workarounds can be applied:
|
DLPX-77849 | Excessive number of connections to SQL Server Instance observed by Delphix Environment User. This causes infra issues and leads to LSASS.exe to crash and host to reboot | Rather than using a Windows domain user for authentication switch the dSource to use a database user. It seems SQL Server may be able to handle the massive number of connections that Delphix is establishing for each dSource better than Windows LSASS.EXE. |
DLPX-77869 | Unable to drop and recreate descending order (or any other functional) index as part of Oracle Connector masking/reidentification/tokenization jobs. | Oracle interprets descending order as functional indexes. There is no workaround. This is a known limitation of Drop Indexes for Oracle connectors that will be resolved in a future release. |
DLPX-78015 | V2P export with absolute data files is failing with an internal error. | No workaround. |
DLPX-78263 | A SnapSync of an Oracle standby dSource in Real-Time Apply mode sometimes fails with " | Force a log switch on all primary instances/nodes and then try another SnapSync. |
Version 6.0.10.0
Key | Summary | Workaround |
---|---|---|
DLPX-77467 | Loading the setup app dashboard (as sysadmin) renders a server error popup with instruction to contact Delphix Support. This message can be ignored. However, it is known that this error impairs the ability to configure web proxy, PhoneHome, and SMTP servers via the GUI. | These settings can still be configured via the CLI. This issue will be fixed in the next version release. |
DLPX-64082 | Oracle provisioning scripts have hard-coded timeouts. | Retry the provisioning operation to see if it succeeds. Otherwise, contact Delphix Support. |
DLPX-72369 | RAC migration for VDB with a deleted parent may fail with error "Cannot update RAC instances if virtual source 'xxx' has a deleted parent." | No workaround. |
DLPX-74896 | Race condition during refresh may result in incorrect engine metadata entry for parent snapshot. | No workaround. |
DLPX-75148 | DSP throughput tests do not work when from-version is < 6.0.6.0 and target-version is >= 6.0.6.0. | No workaround, however, the user will need to upgrade the source version. |
DLPX-75215 | Switching AWS instance types can leave the Delphix engine with no network configuration. | On Nitro-based instance types, use the virtual machine's virtual serial console and login to the sysadmin CLI, then add a DHCP address to the network interface. |
DLPX-75995 | On Windows 2019 Server, with KB4598230 cumulative update, adding or refreshing an environment fails when PowerShell transcription is enabled. | The user has to turn off the transcription if the staging is on Windows 2019 Server with recent updates. |
DLPX-77231 | When source discontinuity on the dSource is followed by resync on the Oracle LiveSource, one or more LiveSources workers may fail to start. This prevents the LiveSource status from getting updated and the first snapshot from being taken after a resync. | No workaround. |
DLPX-77849 | Excessive number of connections to SQL Server Instance observed by Delphix Environment User. This causes infra issues and leads to LSASS.exe to crash and host to reboot | Rather than using a Windows domain user for authentication switch the dSource to use a database user. It seems SQL Server may be able to handle the massive number of connections that Delphix is establishing for each dSource better than Windows LSASS.EXE. |
Version 6.0.9.0
Key | Summary | Workaround |
---|---|---|
DLPX-72186 | CDB logfile retention works incorrectly if a PDB has multiple timeflows pointing to the same CDB timeflow. | No workaround. |
DLPX-74749 | Oracle ENVIRONMENT_REFRESH_AND_DISCOVER job may fail with "The object OraclePDBConfig does not exist on the system". | Manually run an environment refresh after the ENVIRONMENT_REFRESH_AND_DISCOVER job fails. |
DLPX-75517 | Provisioning an Oracle vPDB to a vCDB fails with " | One of the following two workarounds can be applied:
|
DLPX-75737 | Retention saves unnecessary logs if the bookmark falls exactly on a snapshot end SCN or snapshot end timestamp. | No workaround. |
DLPX-75995 | On Windows 2019 Server, with KB4598230 cumulative update, adding or refreshing an environment fails when PowerShell transcription is enabled. | The user has to turn off the transcription if the staging is on Windows 2019 Server with recent updates. |
DLPX-76388 | Entering key pairs directly into hook environment variables (a new feature in 6.0.9.0) results in an internal error. | Use password variables instead, or use a password vault. See Passing Credentials Securely to Hook Operations |
Version 6.0.8.0
Key | Summary | Workaround |
---|---|---|
DLPX-64307 | Environment refresh should ignore cluster discovery for VDBs | The following workaround should resolve the issue without Delphix support intervention. For RAC databases
CODE
From here, we recommend removing the clusterware configuration.
CODE
CODE
For RACOne databases
CODE
CODE
CODE
CODE
The pfile is located in
CODE
CODE
When querying the status of the database, it should now show a running instance. As an example:
CODE
From here, we recommend removing the clusterware configuration.
CODE
CODE
10. Refresh the environment. |
DLPX-72186 | CDB logfile retention works incorrectly if a PDB has multiple timeflows pointing to the same CDB timeflow | No workaround. |
DLPX-73409 | Duplicate listener entry gets generated in engine metadata if Oracle listener is manually started with non-uppercase name | Follow these steps:
|
DLPX-74749 | Oracle ENVIRONMENT_REFRESH_AND_DISCOVER job may fail with "The object OraclePDBConfig does not exist on the system" | Manually run an environment refresh after the ENVIRONMENT_REFRESH_AND_DISCOVER job fails. |
DLPX-74860 | Provisioning a 2nd generation VDB from a dSource with imported RO transportable tablespaces fails with ORA-19654 | No workaround. |
DLPX-74882 | Masking's SFTP client no longer compatible with SolarWinds and Goanyware SFTP servers | No workaround. |
DLPX-75517 | Provisioning an Oracle vPDB to a vCDB fails with " | One of the following two workarounds can be applied:
|
Version 6.0.7.0
Key | Summary | Workaround |
---|---|---|
DLPX-74457 | Cluster discovery for Oracle RAC partially fails on Solaris 10 | Switch the default login shell for the Delphix OS user from |
DLPX-74749 | Oracle ENVIRONMENT_REFRESH_AND_DISCOVER job may fail with "The object OraclePDBConfig does not exist on the system" | Manually run an environment refresh from the Delphix UI if the ENVIRONMENT_REFRESH_AND_DISCOVER job fails with the mentioned error. |
DLPX-76718 | Time required to display the point-in-time pop-over on timelines for Self-Service Templates with replicated objects can degrade linearly with each replication. | No workaround but reducing replication frequency can reduce the impact. |
Version 6.0.6.0
Key | Summary | Workaround |
---|---|---|
DLPX-73224 | When provisioning from a non-multitenant source to a virtual pluggable database (vPDB), the post-plug hook script (dx-post-plug-hook.sh) should exit with the vPDB either closed or open unrestricted. If the vPDB is left open with restricted access subsequent Snapshots of the vPDB will fail with "oracle.ucp.UniversalConnectionPoolException" and " java.sql.SQLException: ORA-01035 ORACLE only available to users with RESTRICTED SESSION privilege" . | To prevent the issue: Ensure that the vPDB is either closed/mounted or open unrestricted when exiting from dx-post-plug-hook.sh. After it has happened: close and reopen the vPDB. |
DLPX-72749 | Provisioning a TDE-enabled vPDB with system encrypted tablespaces fails with the error "ORA-28374: typed master key not found". | No workaround, contact Delphix Support (TBD) |
DLPX-72655 | Provisioning an Oracle TDE-enabled vPDB fails intermittently if the dSource is encrypted after linking | Enabling TDE on an existing non-encrypted dSource is not supported. Detach, rename the Delphix dSource name and re-attach it as a new TDE-enabled dSource before re-attempting the provisioning operation. |
DLPX-73224 | When provisioning from a non-multitenant source to a virtual pluggable database (vPDB), the post-plug hook script (dx-post-plug-hook.sh) should exit with the vPDB either closed or open unrestricted. If the vPDB is left open with restricted access subsequent Snapshots of the vPDB will fail with "oracle.ucp.UniversalConnectionPoolException" and " java.sql.SQLException: ORA-01035 ORACLE only available to users with RESTRICTED SESSION privilege" | To prevent the issue: Ensure that the vPDB is either closed/mounted or open unrestricted when exiting from dx-post-plug-hook.sh. After it has happened: close and reopen the vPDB. |
DLPX-73357 | Rewinding an Oracle TDE-enabled vPDB to the snapshot before vPDB migration may fail with | Verify that the CDB is restarted after merging the keys of the old target CDB into the new target CDB and re-attempt the rewind operation. If the rewind still fails, provision a new vPDB from the required snapshot instead of the rewind operation. |
DLPX-72181 | The "Restore Self-Service data container from the bookmark of sibling data container" operation may fail in an Oracle TDE environment with | Verify that the procedure for merging the sibling keystores is followed correctly and re-attempt the self-service operation. |
DLPX-73742 | Provisioning an Oracle TDE-enabled vPDB may fail with the error "ORA-28367: wallet does not exist" if the TDE wallet for the target linked CDB is stored on ASM storage | Storing the TDE wallet on ASM storage is currently unsupported. Modify |
DLPX-73788 | Provisioning or enabling an Oracle TDE-enabled vPDB fails when $ORACLE_BASE is used in sqlnet.ora | Any environment variable referenced in sqlnet.ora must always be set in the environment for the Delphix OS user. Ensure that the environment variable $ORACLE_BASE is set in the shell initialization file for the Delphix OS user and re-attempt the operation. |
DLPX-73789 | If WALLET_ROOT initialization parameter is configured on a TDE-enabled dSource PDB, provisioning may fail since the auxiliary CDB instance uses dSource keystore location. | If the provision fails, there are 2 workarounds:
|
Version 6.0.2.0
Key | Summary | Workaround |
---|---|---|
DLPX-69638 | Masking job created on engine 6.0.1.1 or prior is failing after the upgrade to version 6.0.2.0 or later | Masking jobs created in 6.0.1.x using a Hana JDBC driver will need to be updated to grant the following permission {"java.io.FilePermission" "/", "read"} in 6.0.2.0. All drivers created in and after 6.0.2.0 will be granted this permission by default. |
Version 6.0.0.0
Key | Summary | Workaround |
---|---|---|
DLPX-60397 | If a mapping algorithm is included in multiple jobs, only one job should be run at a time. If multiple jobs are run at the same time, then the mapping algorithm might contain multiple mappings to the same value or the jobs might deadlock. | Only run one job at a time. |
DLPX-60947 | Self-Service template with replica VDB is not updated with new Timeflow on incremental replication update | The latest replica VDB data can still be accessed by doing a Self-Service container Refresh, rather than a point-in-time restore from the template. |
DLPX-61079 | Certificate import validation may incorrectly reject a root CA certificate | Support must manually import the certificate into the truststore. |
DLPX-61405 | Masking operation should wait for zfs delete queue to drain | Replication may send more data than expected if masking involves dropping large DBF files. |
DLPX-64493 | V5 API /roles endpoint missing certain items | View and set these privileges through the GUI |
DLPX-66155 | Failed DSP engine test leads to multiple blocked client.jar processes on target hosts. | Restarting a Delphix Engine during a network throughput test is not recommended as it may lead to a system hang. |
DLPX-66860 | ADFS does not like NameIDPolicy sent by SSO app | Create an explicit rule in ADFS that transforms the {{emailAddress}} attribute into a {{nameid}}. The rule type must be "Transform an incoming claim". The incoming claim type must be "Email address" and the outgoing claim type "Name ID". The nameid format must be "Email address". |
DLPX-66973 | Date format is changed after importing the environment | Either (a) use the GUI import feature and then review the imported date formats for correctness or (b) use EngineSync to export/import jobs, which will not alter the date format. |