Deployment for AWS EC2

Memory Optimized instance families:

The minimum requirements are listed below:

• 8 vCPUs minimum

• 64 GB RAM minimum

• 10 Gbps min (25 Gbps recommended) 

• Enhanced Networking

• Processors: Intel or AMD (No ARM/Graviton)

• Storage: SSD or NVMe (No HDD)

Recommended instance families:

• R4

• R5n

• R5b

• R6in

• R6idn

• Larger instance types provide more CPU, which can prevent resource shortfalls under high I/O throughput conditions.

• Larger instances also provide more memory, which Continuous Data uses to cache database blocks. More memory will provide better read performance.

• Delphix Elastic Data Engines (engines backed by object storage) will need more bandwidth than traditional engines (backed by EBS) because the s3 bucket used to store data is accessed over a network pipe that is shared with other engines activity.

  Information on AWS instances

Virtual Private Cloud

The Delphix Engine and all of the source and target environments must be deployed in a VPC network to ensure that private IP addresses are static and do not change when restarting instances.

When adding environments to the Delphix Engine, use the host's VPC (static private) IP addresses.

Static Public IP

The EC2 Delphix instance must be launched with a static IP address; however, the default behavior for VPC instances is to launch with a dynamic public IP address – which can change whenever the instance restarts. If using a public IP address for the Delphix Engine, static IP addresses can only be achieved by using assigned AWS Elastic IP Addresses

Security Group Configuration

The default security group will only open port 22 for SSH access. The security group must be modified to allow access to all of the networking ports used by the Delphix Engine and the various source and target engines. 

See Network Performance Configuration Options for information about network performance tuning.

See General Network and Connectivity Requirements for information about specific port configurations.

EBS Provisioned IOPS SSD Volumes
(Highly Recommended)

Delphix does not support the use of instance store volumes.

Use EBS volumes with provisioned IOPs in order to provide consistent and predictable performance. The number of provisioned IOPs depends on the estimated IO workload on the Delphix Engine. 

Provisioned IOPs volumes must be configured with a volume size to provisioned IOPs per the EBS Volume Types guidelines.

EBS General Purpose SSD Volumes

Delphix supports GP2 and GP3 General Purpose SSDs. You can now migrate your Amazon EBS volumes from GP2 to GP3. For more details on migration, see this Amazon documentation on EBS Volumes Migration.

Delphix Elastic Data (Engines backed by s3 storage) need gp3 or higher.

General Storage Configuration

For Delphix Continuous Cloud Engines backed by s3 object storage, read the section Delphix Elastic Data Engines (Engines backed by object storage) in Initial Setup.
For Regular engines (backed by EBS):

• Allocate initial storage equal to the size of the physical source database storage. For high redo rates and/or high DB change rates, allocate an additional 10-20 %.

• All data storage volumes must be EBS volumes.

Delphix recommends using a minimum of four equally sized storage disks to run the Delphix Engine. This allows the Delphix File System (DxFS) to assure its file systems are always consistent on disk without additional serialization. This also enables the Delphix Engine to achieve higher I/O rates by queueing more I/O operations to its storage.