Skip to main content
Skip table of contents

Network and connectivity requirements for Windows environment

Port allocations specific to unstructured files

The Delphix Engine makes use of the following network ports for unstructured files dSources and VDBs:

Outbound from the Delphix Engine

Protocol

Port Numbers

Use

TCP

xxxx

Delphix Connector connections to source and target environments. Typically, the Delphix Connector runs on port 9100.

Inbound to the Delphix Engine

Protocol

Port Number

Use

TCP

3260

iSCSI target daemon for connections from iSCSI initiators on the target environments to the Delphix Engine

TCP

53261

Provides a connection from a staging or target environment to the engine when encryption is enabled for the Windows environment.

Outbound from a source, staging, or target environment

Protocol

Port Numbers

Use

TCP

80

The Delphix Connector registers environments over HTTP

TCP

xxxx

DSP connections used for monitoring and script management. Typically, DSP runs on port 8415.

Inbound to a source, staging, or target environment

Protocol

Port Numbers

Use

TCP

xxxx

Delphix Connector connections to source environments. Typically, the Delphix Connector runs on port 9100.

TCP

445

If a staging environment is used, the staging server must be able to access SMB (Windows File Sharing) files on the source server.

General outbound from the Delphix Engine port allocation

Protocol

Port Numbers

Use

TCP

25

Connection to a local SMTP server for sending email

TCP/UDP

53

Connections to local DNS servers

UDP

123

Connection to an NTP server

UDP

162

Sending SNMP TRAP messages to an SNMP Manager

TCP

443

HTTPS connections from the Delphix Engine to the Delphix Support upload server

TCP/UDP

636

Secure connections to an LDAP server

TCP

8415

Connections to a Delphix replication target. See Configuring Replication.

TCP

50001

Connections to source and target environments for network performance tests.

General inbound to the Delphix Engine port allocation

Protocol

Port Number

Use

TCP

22

SSH connections to the Delphix Engine

TCP

80

HTTP connections to the Delphix GUI

UDP

161

Messages from an SNMP Manager to the Delphix Engine

TCP

443

HTTPS connections to the Delphix Management Application

TCP

8415

Delphix Session Protocol connections from all DSP-based network services including Replication, SnapSync for Oracle, V2P, and the Delphix Connector.

TCP

50001

Connections from source and target environments for network performance tests via the Delphix CLI.

Firewalls and Intrusion Detection Systems (IDS)

Production databases on source environments (for dSources) are often separated from the non-production environment by firewalls. Firewalls can add milliseconds to the latency between servers. Accordingly, for best performance, there should be no firewalls between the Delphix Engine and the virtual database (VDB) target environments. If the Delphix Engine is separated from a source environment by a firewall, the firewall must be configured to permit network connections between the Delphix Engine and the source environments for the application protocols (ports) listed above.

Intrusion detection systems (IDSs) should also be made permissive to the Delphix Engine deployment. IDSs should be made aware of the anticipated high volumes of data transfer between dSources and the Delphix Engine.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.