SAP ASE matrix
This topic describes supported operating systems and database versions for SAP ASE.
Supported DBMS versions
ASE 15.5
ASE 15.7
ASE 16.0
Supported operating systems and database versions for SAP ASE
Source and Target OS and DBMS compatibility
The source and target must be running the same DBMS/Operating System combination, (although users can run different patch/sp levels) in order to successfully provision a VDB to the target. For example, if the source is running SAP ASE 16, the target can be running ASE 16SP1. However, for ASE 15.7 the versions of the source and target should both be in the 15.7 SP100 to 15.7 SP140 or 15.7 ESD#1 to 15.7 SP64 ranges. There can be no mixing of versions between these two ranges. If the target is used as a staging server, the same rule applies (prior to Delphix 5.2.5.0, the staging server had to match the source server's version down to the SP level). The Operating System platform must be the same between the source and target, even when the operating system version may differ. For example, if the source is running Red Hat Enterprise Linux 6.2 x86_64 then the target could be running Red Hat Enterprise Linux 6.4 x86_64, but not Solaris 10 SPARC.
ASE itself may or may not allow the MOUNT command to work between versions. Be sure to check that the UNMOUNT and MOUNT commands work between your desired ASE versions.
So for example, if we upgraded the ASE staging instance to ASE 15.7 SP140 but we keep the ASE instance hosting the VDBs at ASE 15.7 SP135, we would want to make sure that we can UNMOUNT a database from ASE 15.7 SP140 and then MOUNT it on ASE 15.7 SP135:
isql -Usa -Psybase -SASE157SP140 1> UNMOUNT DATABASE testdb to "/tmp/manifest" 2> GO isql -Usa -Psybase -S ASE157SP135 1> MOUNT DATABASE testdb from "/tmp/manifest" 2> go Msg 14580, Level 16, State 1: Server 'ASE157SP135', Line 1: You cannot mount the database(s) because at least one database contains functionality that is available only on the server on which it originated.
In the above example, ASE would not allow the database "testdb" to be mounted on the older release of ASE.
Required HP-UX patch for target servers
PHNE_37851 - resolves a known bug in HP-UX NFS client prior to HP-UX 11.31.
Delphix Support Policies specifically list Major and Minor release coverage. If a minor release is listed as covered, then all patch releases under that minor release are certified.
Delphix only supports 64-bit operating systems.
Key:
Color | Supported? |
|---|---|
Y | Yes |
N | No |
NA | Not Applicable |
Red Hat Enterprise Linux (RHEL)
Support for RHEL 8.x requires installing the libncurses.5 library onto the host. Please reference KBA 5622 for actionable steps.
The following SAP ASE 16 versions on RHEL 9.x are supported as per the SAP KBAs mentioned below:
ASE 16.0 supported version on 9.x:
16.0 SP03 PL13
16.0 SP03 PL14
16.0 SP03 PL15
16.0 SP04 PL03
16.0 SP04 PL04
16.0 SP04 PL05
16.0 SP04 PL06
SAP KBA links:
2987324 - SAP ASE 16.0 SP04 Supported Operating Systems and Versions - SAP for Me
2489781 - SAP ASE 16.0 SP03 Supported Operating Systems and Versions - SAP for Me
Supported OS version | Supported DBMS version | ||
|---|---|---|---|
15.5 | 15.7 | 16 | |
RHEL 6.0 | N | N | NA |
RHEL 6.1 | N | N | N |
RHEL 6.2 | Y | Y | N |
RHEL 6.3 | Y | Y | N |
RHEL 6.4 | Y | Y | N |
RHEL 6.5 | Y | Y | Y |
RHEL 6.6 | Y | Y | Y |
RHEL 6.7 | Y | Y | Y |
RHEL 6.8 | Y | Y | Y |
RHEL 6.9 | Y | Y | Y |
RHEL 6.10 | Y | Y | Y |
RHEL 7.0 | NA | Y | Y |
RHEL 7.1 | NA | Y | Y |
RHEL 7.2 | NA | Y | Y |
RHEL 7.3 | NA | Y | Y |
RHEL 7.4 | NA | Y | Y |
RHEL 7.5 | NA | Y | Y |
RHEL 7.6 | NA | Y | Y |
RHEL 7.7 | NA | Y | Y |
RHEL 7.8 | NA | Y 6.0.3+ | Y 6.0.3+ |
RHEL 7.9 | NA | Y 6.0.4+ | Y 6.0.4+ |
RHEL 8.0 | NA | NA | Y |
RHEL 8.1 | NA | NA | Y 6.0.4+ |
RHEL 8.2 | NA | NA | Y 6.0.4+ |
RHEL 8.3 | NA | NA | Y 6.0.7+ |
RHEL 9.0 | NA | NA | Y 27.0.0.0+ |
RHEL 9.1 | NA | NA | Y 27.0.0.0+ |
RHEL 9.2 | NA | NA | Y 27.0.0.0+ |
RHEL 9.3 | NA | NA | Y 27.0.0.0+ |
RHEL 9.4 | NA | NA | Y 27.0.0.0+ |
SUSE Linux Enterprise Server (SLES)
Support for SLES 15 requires installing the libncurses.5 library onto the host. Please reference KBA 5622 for actionable steps.
Supported OS version | Supported DBMS version | ||
|---|---|---|---|
15.5 | 15.7 | 16 | |
SLES 11 | N | N | N |
SLES 11 SP1 | N | N | N |
SLES 11 SP 2 | N | N | N |
SLES 11 SP 3 | N | N | N |
SLES 11 SP 4 | N | N | N |
SLES 12 | N | N | N |
SLES 12 SP 1 | N | N | N |
SLES 12 SP 2 | N | N | N |
SLES 12 SP 3 | N | N | N |
SLES 12 SP 4 | N | N | Y 6.0.4+ |
Solaris SPARC
Supported OS Version | Supported DBMS version | ||
|---|---|---|---|
15.5 | 15.7 | 16 | |
Solaris 10 U9 | Y | Y | N |
Solaris 10 U10 | Y | Y | N |
Solaris 10 U11 | Y | Y | N |
Solaris 11 | N | N | N |
Solaris 11 U1 | N | N | N |
Solaris 11 U2 | N | N | N |
Solaris 11 U3 | N | Y | N |
Solaris 11 U4 | N | Y 6.0.1.0+ | Y 6.0.1.0+ |
Solaris x86
Supported OS version | Supported DBMS version | ||
|---|---|---|---|
15.5 | 15.7 | 16 | |
Solaris 10 U91 | Y | Y | N |
Solaris 10 U101 | Y | Y | N |
Solaris 10 U11 | NA | Y | N |
Solaris 11 | NA | Y | Y |
Solaris 11 U1 | NA | Y | Y |
Solaris 11 U2 | NA | Y | Y |
Solaris 11 U3 | NA | Y | Y |
Solaris 11 U4 | NA | N | N |
Hewlett Packard Unix (HP-UX)
Supported DBMS version | |||
Supported OS version | 15.5 | 15.7 | 16 |
HP-UX 11.31 | N | N | N |
Advanced Interactive executive (AIX)
Supported DBMS version | |||
Supported OS version | 15.5 | 15.7 | 16 |
AIX 7.1 | N | Y | Y 6.0.1.0+ |
AIX 7.2 | N | Y | Y |